The 3500 framework for the installation of all the monitor module and the frame power. It provides backplane communications for the mutual communication between each frame 3500, and provide the required power for each module. 3500 rack in two sizes: 1. Full-size frame --19-inch EIA framework Woodward oil motive, there are 14 available module slots 2. Compact Framework --12-inch frame, there are seven available module slots 3500 There are three forms of the framework of ordering: 1. Panel Mount - 3500 frame mounted on the rectangular opening on the panel in Woodward, using the clamp fastening with framework. Back frame connection and access to I / O modules from. 2. Frame Installation - 3500 frame mounted on 19-inch EIA rails. Back frame connection and access to I / O modules from. 3. siding installation - 3500 frame mounted on the wall or be unable to connect from the back panel. Front frame connection and access to I / O modules from. 3500/05 mini-frame Without this option. Power and Rack Interface Module must be installed in the leftmost two slots. The remaining 14 frame position (for it is remaining with the mini-frame 7 positions) can install any module. If you need to install an internal barrier 3500 framework, you can refer to 3500 Internal Barriers technical specifications and ordering information, part number 141495-01. The 3500 Transient Data Interface (TDI) is an interface 3500 monitoring system and Bently Nevada System 1? Machinery management software. TDI combines the 3500/20 Rack Interface Module (RIM) and communications processors, such as functional TDXnet of. TDI operates in the RIM slot of a 3500 framework in Woodward turbine control, and M series monitors (3500 / 40M, 3500 / 42M, etc.) with the use of a continuous steady-state and transient waveform data acquisition via Ethernet to transfer data to the host computer software. Static data collection TDI has a standard, but using the optional channel enable disk can also be dynamic or transient data acquisition. TDI compared to the previous communication processors, in addition to the communications processor functionality into 3500 framework, there are several other improvements. TDI provides common functionality for the entire frame, but not part of the critical monitoring path, does not affect the right of the monitoring system and conventional operation. Each frame requires a TDI or RIM. TDI occupies only one slot in the frame, it must be located in the first slot (next to the power supply module). For Triple Modular Redundant (TMR) applications, the 3500 System Requirements TMR form of TDI. In addition to all the standard TDI functions, TMR TDI also performs "monitor channel comparison." By selecting the option to install the monitor function Woodward turbine control system, 3500TMR configured to perform monitoring functions vote. In this way, TMR TDI compare three redundant continuous monitor output. If the TMR TDI detects that the information from a monitor with the other two monitors are not equal (within a percentage configured), it will send the wrong directions to the monitor, and add an event in the system event list. Woodward | Shenyang Empire | Woodward turbine control system provided by the Shenyang Automation Equipment Co., Ltd. Empire. "Automation control equipment, machinery and equipment, electronic equipment development and design" preferred Empire Shenyang Automation Equipment Co., Ltd. (www.syepe.net), the company is located: Tiexi District of Shenyang Xinghua North Street 18 A 1404, over the years, Shenyang TU Pyle Automation Equipment Co., Ltd. to provide customers with the best quality service, contact: Lien Ning. Welcome to the new and old customers call, letter, visit the guide, business negotiations. Empire Shenyang Automation Equipment Co. expect to be your long-term partner!